Coming Soon

. The ALL NEW  Series P25 ready repeater. The development of the new APCO P25 series repeater is well under way. The control board that was exhibited at IWCE 2006 and 2007 has been further enhanced with new features that were requested by RFT's major customers and show delegates. Various Interfacing options, remote monitoring and programming facilities are built in. This repeater will feature software upgrade options to full P25 compliance, fits into a standard RFT 2U module size and operates with 13.8V DC power supply. 

. The Eclipse Series 700 repeater. 746 - 806 MHz. The receiver , transmitter and power amplifier are in final stages of development. Rated to 80W the new PA700 power amplifier utilizes MOSFET technology with 13.8V DC power supply.

Available Now

. The Eclipse Hot Standby Switch. The HSS-1 is designed to switch a main repeater's RF signal and audio paths to a standby repeater in the event of any malfunction of the main repeater. Used in conjunction with the Alarm Trunking Interface, any alarm condition or ac/dc power loss to the main repeater will cause the HSS to switch to the standby repeater. Auxiliary inputs are provided for remote testing and control of the HSS.

. The Eclipse Tone Signalling module. The DCS/CTCSS (9176) module has replaced the standard CTCSS (9150) module in the receivers and transmitters. It provides CTCSS & DCS decoding and Pilot Tone generation for receivers and CTCSS, DCS and CWID encoding  for transmitters. It can be factory installed or customer installed with little modification to the pcb. Requires upgraded firmware, 4.032MHz crystal and Service Monitor 2000 v2.2 or later.

. The Eclipse Diagnostics software for MS Windows. Service Monitor 2000 v2.2.3 is the latest update with supported features including DCS, CWID and Pilot Tone programming with built in Help instructions. 

. The Eclipse space Diversity Receivers card. This option card allows the monitoring of 2 receivers RSSI signal levels and simultaneously switches the better audio signal level to the output. The receivers COS outputs are connected to a single line for TX PTT input.

. The Eclipse Alarm Trunking Interface (ATI). This option card in it's 5th revision provides easy connection from the repeater to third party LTR and MPT controllers via a single DB-25F connector. A common alarm output is also provided for monitoring both receiver and transmitter alarms.

. The Eclipse Status Tone Generator (STG-1). This option card for receivers provides a pilot tone during receiver "squelched" operation. It is a plug in board for Eclipse 66MHz to 930MHz receivers and can be easily adapted to third party receivers.

. The Eclipse Voting Receiver. This option includes the Status Tone Generator for Eclipse 66MHz to 930MHz receivers and assembled as a complete unit in a 1U 19" rack mount package.

. The Eclipse SSASU ( Solid State Antenna Switching Units ). These switching units are available now and eliminate the unreliable mechanical relays for antenna switching applications. They are available for 25 - 50MHz, 66 - 88 MHz, 136 -174 MHz, 215 - 240 Mhz and 400 - 520 MHz.

. The Eclipse 1U Repeater. This 1U 19" rack mounted repeater in all the popular Eclipse frequency bands for power levels up to 25 Watts is now available in all models.  It has all the standard features of the current modules including built-in speaker and microphone socket, with only DCS/CTCSS as an option.